ACM Extrusion

Extrusion Equipment; Pelletizing Equipment

Virtus Equipment is pleased to welcome ACM Extrusion to the Virtus Equipment family of plastic solutions. This partnership with ACM Extrusion further expands our capabilities and specialized expertise to better serve Virtus Equipment’s customers with a comprehensive product range. ACM Extrusion offers quality, high-performing machines that operate efficiently and cost-effectively.

Our pipe, profile, tubing production lines, tile extrusion lines, foaming board, sheet, board, plate extrusion lines, and pelletizing lines have made us an integral link for the plastic processing industry.

We offer a total solution to fulfill your needs – a combination of product capabilities and support services that serve your production and business goals.

Pre-Sale Support Services – First, we listen. The goal is to fully understand your specific application requirements for system specifications, timing, delivery, and budget. Then, we present system options and even help you create a case for justification.
Implementation Planning – Before we build your system, we help you think through workflow and process integration. We also initiate our expert project management process to track the build and delivery against your requirements.
Systems Built To Exact Standards – Our manufacturing operations are the most experienced and skilled in the industry. They work meticulously to meet the most rigorous customer and industry standards.
Installation Support And Training – We simplify the integration of the system into your operation with installation, start-up and commissioning support, and operator and maintenance training. We also run trials so you can test your system before and after delivery.
Ongoing Service And System Support – We support you through the entire product life cycle to keep your cost of ownership low.

ACM Extrusion provides business owners with quality, affordable solutions to minimizing waste and maximizing profit.

Established in 1945, American Baler Company is one of the oldest and most respected baler manufacturers in the world. We manufacture a complete line of balers so that we can provide solutions to customers in a wide range of industries. These products include manual-tie and auto-tie single ram horizontal balers and two ram auto-tie balers for both low-volume and high-production applications. American Baler Company specializes in highly efficient balers that are designed to keep energy costs and baling wire consumption to a minimum. Headquartered in Bellevue, Ohio, American Baler Company has provided baling solutions to customers around the world. We build quality machines that are designed to provide years of reliable service for our customers. American Baler Company maintains a progressive engineering department utilizing the latest design technology and a dedicated group of field service technicians who are available to assist you with knowledgeable and practical solutions to help you keep your baler operating productively for many years. American Baler Company has the support of a worldwide dealer network. Our dealers are trained to help you find the right baler for your application and to provide ongoing local parts and service support after baler start-up.

            
            
            
Conair

Conair Group offers new and used auxiliary equipment you can count on, including blenders, dryers, resin-handling systems, temperature control equipment, granulators and downstream extrusion solutions. Reliable, high-performance auxiliaries, backed by the industry’s best service, help you compete with confidence and win in the global economy.

Dynamic Conveyor Corporation

DynaCon® modular conveyor systems offer a sustainable conveying solution. Like Lego building blocks, our conveyors use modules that allow the conveyors to be easily configured and reconfigured. Modules are built using strong and durable plastic injection molded parts that are light-weight enough for easy conveyor reconfiguration when needs change. Flexibility of design includes choices for length, width, inclines, declines, lateral turns, belt styles and an array of accessory options. DynaCon conveyors offer a low cost of ownership by being maintenance free, energy efficient, cost effective to repair and reconfigurable. DynaCon conveyors can be reconfigured again and again to last a lifetime!

FACTS is a supplier of Measurement and Control systems for the Plastics Industry. We specialize in:
· Scanning Measurement systems for Sheet, Film and Web applications
· Extrusion control upgrades
· Heater electrical panel assemblies
· Motor and Drive replacements
· Information Management and Reporting Systems

HYRobotics Corp

HYRobotics offers unique solutions with a full line of robotics systems. Our broad robotics line enables us to provide the precise solution for your needs, even for highly specialized tasks. HYRobotics has developed and manufactured robots for plastics injection molding machines since 1988. We offer a diverse line of products, ranging from 30 tons to 4,000 tons, providing automation from simple to complex for customer's need in mind. Our products line includes a diverse series of robots designed for sprue and parts removal, fully integrated factory automation for insert molding, de-gating and in mold labeling, and parts stacking. We offer custom designed machines to supplement any of your automation needs. The HYRobotics staff is fully trained and knowledgeable about plant automation, and we value the prominence of productivity. HYRobotics is a dedicated robotics manufacturing company with an ISO 9001 certified environment for high quality control systems and an enterprise Resource Planning System has been implemented to maximize customer satisfaction with incredible technical support. Our technical innovation and dependability will strengthen the manufacturing productivity in your business and throughout the world.

            
            

International Baler Corporation’s diverse product line offers the flexibility to adapt our equipment to fit the application, from large volume rigid plastics manufacturers and processors to smaller recyclers of post-consumer PET . Our expertise in systems engineering and application consultation, combined with our dedication to providing outstanding customer service before, during, and after the sale, means that you can expect knowledgeable support for the long life of your equipment.

            

Lung Meng Machinery (USA), Inc. was founded 1991 in Miami, Florida, United States. Our mission over the last years has been to provide top quality plastic machinery from our factories with complete service.

Our main machinery products include blown film extruders, stack and CI flexographic presses, various type bag making machines, recycling machines, blow molding machines, WPC, PVC pipe, Hollow profile extruders as well as the sheet extrusion lines.

With our services, customers benefit from increased capacity and production, higher efficiency, and improved cost control with very affordable expenses.

MAC Automation Concepts

For over 30 years MAC is committed to providing superior quality and economic value to its customers. We serve the Plastics Industry with auxiliary equipment including: Conveyors, Plantwide Automation Equipment, Automated Box-Fill Systems, Portable Resin Bins, Resin Loaders, Part/Runner Separators and diverters, Inspection Tables, Cleanrooms, Drum and Gaylord box Filter Covers, Air Conveying Systems, Robot Guarding, Mold Side Curtains, Tie bar Sleeves and Under-Press Part Chutes.

Maguire Products Inc.

Headquartered in Aston, Pennsylvania, USA, Maguire manufactures gravimetric blenders and feeders, volumetric feeders, ULTRA low energy dryers, conveying systems, extrusion control systems, loss in weight extrusion control, and related auxiliaries.

Founded in 1977, Maguire Products operates seven manufacturing facilities in Aston, with seven international subsidiaries that service an extensive network of distributors globally.

Monitor Technologies, LLC

Monitor Technologies LLC provides a wide range of solutions for bin level indication, level measurement, inventory management, solids flow monitoring, moisture measurement, dust monitoring and bin aeration relating to the storage and processing of most powders & bulk solids as well as some liquids and slurries. For over 60 years we have strived to provide high quality products, extensive application support and trusted customer service.

            
            
On Line Controls, Inc.

On Line Controls, Inc. has been suppling precision air regulation for plastic extruders for over 25 years. As the recognized leader in the field, our highly-reliable ultra low air pressure regulators and controllers have a life-expectancy of 10 - 20 years. In 1999 On Line Controls acquired the motorized potentiometer line and manufactures dependable high precision proportional controls for automating analog driven devices.

            
Plastic Process Equipment, Inc.

With a continually expanding range of products, PPE is the largest supplier of molding accessories to the plastic injection molding industry. PPE also manufactures conveyors, separators, hopper dryers and drum tumblers. With offices in Ohio, California and Florida PPE can provide fast delivery and the personal attention that your order deserves. PPE provides the worlds largest variety of accessories for the plastics industry. PPE also manufactures conveyors, separators, hopper loaders, hopper dryers and drum tumblers. With offices in Ohio, California and Florida PPE can provide fast delivery and the personal attention that your order deserves.

Plastixs, LLC

Injection molders, extruders, blow molders, and other manufacturers all rely on Plastixs to keep their machines running smoothly in a variety of production and process environments. As a distributor and manufacturer of high-quality, high-value innovative products for the plastics industry, the Plastixs team understands the needs and challenges that you face. Plastixs clients count on us to increase productivity, eliminate downtime, and prevent small issues from becoming big problems – especially with injection molding, process cooling, and material handling.

Founded in 1999, the product experts at Plastixs will quickly identify, quote and deliver the right components, accessories and supplies that tie your systems together so you have less downtime, quality problems and safety issues – especially in high-temperature, cooling and heating applications for plastics, plastics manufacturing, medical, and food industries.

Put our expansive supplier network, extensive product knowledge, in-house engineering support, and responsive customer service to work for you.

Plastixs manufactures custom water manifold assemblies and accessories that ensure optimal cooling and heating for applications from 300°F to 600°F.  Our turnkey services help to ensure fast time-to-market. We have supplied manifold assemblies to plastic processors and manufacturers of semiconductor equipment, x-ray machines, computer servers, and more.

Plastixs is a premier distributor for Kuriyama, Tigerflex, Kuri Tec, Morris Coupling Company, NORRES, AIRTECT, SMARTFLOW, Barb-Tech, and Bunting, and a platinum distributor for SLIDE Products, and represents many others.

Plastixs is dedicated to providing process industries with unique products and solutions that create value through increased productivity. Contributing to your success is our number one priority.

Republic Machine engineers and manufactures the industry’s most innovative, reliable shredders right here in the USA. We’ve rapidly improved cutting, product feed, power train, and controls to maximize your ROI.

            
            
RGL Sales and Marketing Inc.

a 100% Woman Owned Business

RGL Sales and Marketing Inc. is your number one source for all plastic processor needs. Our purge compounds, mold care products, and other solutions empower customers to efficiently and safely perform the processes at the core of their business models.

            

SINGLE Temperature Controls, Inc. is the largest Global manufacturer of Temperature Control Units (TCU's) by installed base. SINGLE has been in business since 1968 designing and manufacturing top quality TCU's and is a leader in Intelligent Temperature Control. SINGLE offers a full product platform to fit most temperature control applications and has advanced technologies to improve process efficiencies.

Smartflow® by Burger & Brown Engineering, Inc.

Smartflow products are designed and manufactured by Burger & Brown Engineering to help injection molders increase processing efficiency, improve molded part quality and grow profits.

Efficiency and part quality improvements are achieved through cooling water efficiency, faster tool change times, and tooling protection from premature mold closure. Cooling water efficiency products include: cooling water manifolds in anodized aluminum or stainless steel materials. Manifolds can be ordered assembled with IceCube Mechanical flowmeters and regulators or TracerVM series electronic flow meters and Delta-Q flow regulators.

Quick Mold Change components include: SWAP Valve for fast injection mold cooling water evacuation. FasTie Quick Ejector Tie-in Systems and Duoflow manifolds also help molders implement SMED initiatives and change injection molds faster.

In-Mold Sensors for injection molders confirm mold component position, helping to prevent mold damage from out-of-sequence mold closure. Thinswitch ejector plate switch, Smartlock Slide Retainer and Limit Switch and Versaswitch core pull switch are considered industry standards.

Scientific Cooling Classes developed by the company educate molders in mathematical calculations for heat transfer with varying polymers and mold materials. The course also focuses on mold cooling efficiency best practices.

Plastics processors save time and money using Smartflow Injection Molding Accessories. Visit the web site for product details and distributor locations.

Technical Process & Engineering (TPEI) has a proud heritage of providing machining, technical, and manufacturing support services to the thermoplastic and rubber industries since 1979. Founded on a commitment to offer high-quality machine rebuilding services and close-tolerance manufactured aftermarket replacement parts, TPEI also produces and supports its own line of high-output, low-maintenance Compounding Lines, Continuous Mixers, Extruders, Electrical Control Panels, Heating/Cooling Systems, Dies, and new or rebuild parts and components. We have a full-service engineering design staff to assist you with retrofits, redesigns, reproduction of hard-to-find replacement parts and machinery components, and complete “turnkey” custom processing systems to keep your operation productive.

            
            

Temtron electronic repair service is performed by experienced technicians using the latest state of the art equipment. Electronic calibration of the units is performed with precision test equipment traceable to the National Institute of Standards & Technology (NIST). Every instrument sent to us is thoroughly inspected and repaired. The commonly replaced components and power supplies are checked and repaired as necessary. Each instrument is cleaned, calibrated and thoroughly tested and monitored to insure proper working order. All repairs come with our full 1 year limited warranty.

            
Vecoplan, LLC

Vecoplan is the worldwide leader in size reduction technologies. We design, engineer, manufacture, install, and provide ongoing training, parts & service for a comprehensive range of shredders, granulators and grinders used to recycle all types of plastics. But the expertise we’ve gleaned from decades of practical experience in the field is where Vecoplan really shines. Whether you’re looking for an individual machine or a complete recycling system, Vecoplan has the expertise to meet your needs.

WITTMANN BATTENFELD is the leading global manufacturer and supplier of plastics processing equipment with award winning performance and support. Their ONE STOP SHOP offering includes a complete range of innovative robot automation and injection molding machine technology, along with auxiliary equipment for material conveying, blending, drying, granulating, extrusion, heating and cooling, for individual work cells to fully integrated system solutions. EVERYTHING FROM A SINGLE SOURCE!