Fluoro-Plastics, Inc. is the oldest granular PTFE processor in North America, established in 1951 and operating continuously since that time. With two factories located in the United States of America, Fluoro-Plastics produces a full line of granular PTFE plate, sheet, film, rod, tube, profiles and filled PTFE shapes. Material thicknesses range from one mil thick to seven inches thick; rod sizes from 1/8 inch diameter up to two inches diameter, and tube sizes from 1/8 by ¼ up to 2-1/2 by 3 inches. Film and sheet (from 1 mil to 0.250 inches thick is available in rolls from 0.500 inches wide to 48 inches wide in requested lengths (60 inches wide on special order). Small cylinders (rod and tube) from three inch diameter to eight inch diameter. Fluoro-Plastics makes glass filled PTFE, carbon filled PTFE, static dissipative PTFE and many other filled PTFE shapes. In addition, virgin PTFE products are FDA compliant and meet USP Class VI and 3-A Sanitary standards. Certificates of Compliance and testing reports are available at additional charge. Fluoro-Plastics also makes bronze filled slideway and guideway sheets for machine wear surfaces such as Bridgeports, milling machines and other equipment requiring wear surfaces. All PTFE products can be etched on one or both sides for bonding to metal and other surfaces; glass filled PTFE sheets in various sizes and thicknesses are commonly used as bearing pads in infrastructure applications.